Introduction:

 

This infrared thermometer is used for measuring the temperature of the object's surface, which is applicable for various hot, hazardous or hard-toreach objects without contact safely and quickly.

This Unit consist of optics, temperature sensor signal amplifier, processing circult and LCD display. The optics collected the infrared energy emitted by object and focus onto the sensor. Then the sensor translates the energy into an electricity signal. This signal will be turned out to be  digital shown one the LCD after the signal amplifier and processing circuit.

 

 

Specifications:

 

Temperature Range	-50 to 700 degree C(-58 to 1292 degree F)
Accuracy	0 to 700 degree C(32 to 1292 degree F): +/-1.5 degree C(+/-2.7 degree F) or +/- 1.5%  -50 to 0 degree C(-58 to 32 degree F): +/-3 degree C (+/- 5 degree F)
Resolution	0.1 degree C or 0.1 degree F
Repeatability	1% of reading or 1 degree C
Response time	500mSec, 95% response
Spectral Response	8-14 um
Emissivity	0.95 Preset
Distance to spot size	12:1
Operating Temperature	0 to 40 degree C(32 to 104 degree F)
Operating Humidity	10-95%RH non-condensing, up to 30 degree C(86 degree F)
Storage Temperature	-20 to 60 degree C(-4 to 140 degree F)
Power	9V Alkaline or Nicd battery (not include)
Typical battery life(Alkaline)	Non-laser mode: 22 hrs, Laser models: 12hrs

 

 

 

 

Warning&Cautions:

 

1. Warning

 

To avoid  the potential  situation may cause harm or damage to people, please pay attention to the following items:

• Do not point  laser directly at eyes or indirectly off reflective surfaces.
• The unit cannot measure through transparent surfaces such as glass or plastic. It will measure the surface temperature of these material instead.
• Steam, dust, smoke, or other particles can prevent accurate measurement by obstructing by the units optics.

 

 

2. Cautions:

 

Infrared the thermometer should be protected for the following:

• EMF(electro-magnetic fields)from arc welders, induciton heaters
• Thermal shock(cause by large or abrupt ambient  temperature  changes allow 30 minutes for unit to stabilize before use)
• Do not leave the unit on or near objects of high temprature

 

 

 Item Includes:

 

• 1 x Infrared Thermometer
• 1 x User Manual